Hercules G4800 — To Remove The Flywheel
Repair & overhaul
For the Hercules G4800, from the Hercules service manual.
Procedure
- Disconnect and remove transmission and clutch or converter.
- Fabricate 1/2 x 20 x 4 in guide bolt.
- Remove one flywheel bolt and install guide bolt.
- Remove balance of bolts.
- Use pry bar if necessary to pull flywheel from crankshaft.
Tools required
- Lady-foot pry bar Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Source: Hercules service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.