Hercules G4800 — To Remove The Bellhousing

Repair & overhaul

For the Hercules G4800, from the Hercules service manual.

Procedure

1. Remove clutch or power take-off mechanism.
2. Remove flywheel.
3. Support rear of crankcase.
4. Remove rear motor support screws.
5. Remove bellhousing attaching stud nuts.
6. Pull bellhousing away from engine.

Source: Hercules service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Hercules repair guides →