Hercules G4800 — To Install The Bellhousing
Repair & overhaul
For the Hercules G4800, from the Hercules service manual.
Procedure
- Install new bellhousing gasket to cylinder block.
- Check mounting dowels tight and in good condition.
- Install bellhousing and torque nuts in sequence.
- Install rear motor support screws.
- Install flywheel.
- Install clutch or torque converter.
Specs & values
- Torque sequence: 20 ft lbs then 45 ft lbs
Source: Hercules service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.