Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Service Procedure

3516C Generator Set — Service Procedure

For the 3516C Generator Set.

Before you start

  • When the engine is operated in dusty

Procedure

  1. Loosen clamp (1). Slide the clamp down on tube
  2. Loosen clamps (3). Remove both breathers as a
  3. Remove O-ring seals (4) from the valve covers.
  4. Remove two clamps (6). Remove both breathers
  5. Turn the breathers upside-down in order to inspect

Source: manual:SEBU8479-01 M.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.