Home›Repair guides›General Motors›Stopping Engine

General Motors — Stopping Engine

Operation

From a General Motors owner's manual covering: Carb 5.7L, MP 5.0L, MP 5.7L, MP 6.0L. Check it applies to your exact model before use.

Procedure

  1. Bring the throttle back to the idle position and ensure the transmissions are in Neutral.
  2. After the engine reaches idle speed, turn the ignition key to the OFF position.
  3. Allow the engine to idle at 1200 RPM for 3 to 5 minutes to cool down before shutting off the ignition after extended high speed operation.
  4. Turn the battery switch OFF (if equipped).
  5. Close the fuel valve.
  6. Close the seacock.
  7. Flush the cooling system if in a salt water area.

Source: General Motors owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More General Motors repair guides →