General Motors — Replacing the Gasoline Fuel Filter

Maintenance

From a General Motors service manual — check it applies to your exact model before use.

Applies to: General Motors 1.6L engine

Procedure

1. Move the forklift to a well ventilated area and ensure all external ignition sources are not present.
2. Place a drain receptacle under the forklift to capture any fuel which may drain from the lines.
3. Shut OFF the engine.
4. Disconnect the fuel inlet fitting.
5. Disconnect the fuel outlet fitting.
6. Remove the gasoline fuel filter from the mounting bracket.
7. Discard the filter in a safe and proper manner.
8. Reinstall the fuel filter into the securing bracket and tighten retaining fastener.
9. Ensure the filter is mounted in the proper direction, arrow in the direction of flow.
10. Reconnect the inlet and outlet fittings and tighten to specification.
11. Remove drain pan and discard any drained gasoline in a safe and proper manner.
12. Start engine and check for leaks, repair if necessary.

Source: General Motors service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More General Motors repair guides →