Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Engine Oil Level Checking and Filling

General Motors — Engine Oil Level Checking and Filling

A General Motors service procedure — check it applies to your exact model before use.

Browse General Motors generators & specs →

Before you start

  • Care must be taken when checking engine oil level
  • Oil must be maintained between ADD and FULL marks

Procedure

  1. Stop engine if in use.
  2. Allow sufficient time (approximately 5 minutes) for the oil to drain back into the oil pan.
  3. Remove the dipstick. Wipe with a clean cloth or paper towel and reinstall. Push the dipstick all the way into the dipstick tube.
  4. Remove the dipstick and note the oil level.
  5. Ensure oil level is between the FULL and ADD marks on the dipstick.

Specs & torque values

  • Oil level must be between ADD and FULL marks

Source: manual:OM56041564 - GM Maintenance Manual.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.