General Motors — Installation

A General Motors service procedure — check it applies to your exact model before use.

Browse General Motors generators & specs →

Procedure

1. 6. Remove and discard o-ring and the filter
2. 7. Replace the old filter with a new filter
3. 8. Lubricate the new o-ting and place it over
4. 9. Fili the bow! 2/3 full with fuel
5. 10. install the bowl (use strap wrench if
6. 11. Tighten with strap wrench
7. 12. Reconnect battery terminals starting with
8. 13. Turnon the fuel from tank

Source: manual:5.0L-5.7L-MEFI-4-Service-Manual.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.