Home›Repair guides›General Motors›Replace Engine Oil

General Motors GMG-857 — Replace Engine Oil

Maintenance · Engine oil pan

For the General Motors GMG-857, from the General Motors operator's manual.

Applies to: KEM GMG-857, General Motors 5.7L V8 (350 CID) engine

Before you start

  • A badly contaminated or deteriorated oil should be replaced regardless of the replacement intervals.

Parts for this job

Part numbers from the service-parts list for KEM GMG-857. Verify against your serial number before ordering; some links are affiliate links.

Procedure

  1. After shutdown, remove the oil while it is still hot; replace the oil filter at the same time.
  2. Install the drain plug and pour in fresh engine oil up to the FULL mark on the level gauge.
  3. After running the engine at idle for several minutes, recheck the oil level.

Specs & values

  • Replace engine oil after the first 60 hours and every 250 hours thereafter

Full service-parts list: KEM GMG-857 →

Source: General Motors operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More General Motors repair guides →