Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Fuel Pump and Filter Replacement (In-Tank)

General Motors — Fuel Pump and Filter Replacement (In-Tank)

A General Motors service procedure — check it applies to your exact model before use.

Browse General Motors generators & specs →

Procedure

  1. Install the new pump into a new filter.
  2. Insert the filter and pump into the plastic pump holder.
  3. Install the Fuel Pump and holder into the tank in the pump mounting bracket.
  4. Secure the pump holder with the two lower retaining springs and the one upper retaining spring.
  5. Connect the fuel pump electrical connector.
  6. Reinstall the multivalve.

Source: manual:FuelSystem.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.