Home›Repair guides›General Motors›Engine Oil Replacement

General Motors — Engine Oil Replacement

Maintenance

From a General Motors operator's manual covering: 181 CID, 3.0L L4, GMG-430, LW6. Check it applies to your exact model before use.

Applies to: General Motors 3.0L L4 (181 CID) engine

Before you start

  • A badly contaminated or deteriorated oil should be replaced regardless of replacement intervals.
  • Replace oil filter element each time oil is replaced.

Procedure

  1. After shutdown, remove oil while still hot. Replace oil filter at same time.
  2. Install drain plug and pour fresh engine oil from oil filler port up to FULL mark on level gauge.
  3. After running engine at idle for several minutes, recheck oil level.

Specs & values

  • Replace after first 60 hours and every 250 hours thereafter.

Source: General Motors operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More General Motors repair guides →