Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›80% Stop Fill Valve Solenoid Removal

General Motors — 80% Stop Fill Valve Solenoid Removal

A General Motors service procedure — check it applies to your exact model before use.

Browse General Motors generators & specs →

Procedure

  1. Drain the fuel tank, refer to Fuel Tank Draining Procedure.
  2. Remove the multivalve assembly from the tank refer to Multivalve Removal.
  3. Unplug the electrical connector.
  4. Remove the Solenoid retaining nut.
  5. Remove the Solenoid from the valve assembly stem.

Source: manual:FuelSystem.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.