General Motors 5.0 / 5.7 — Engine Flywheel Installation
Repair & overhaul
For the General Motors 5.0 / 5.7, from the General Motors service manual.
Before you start
- Refer to Fastener Notice
Procedure
- Install engine flywheel to crankshaft; align locator hole to locator pin.
- Note position and length of original flywheel weights.
- Install NEW flywheel weights in same location as required.
- Install engine flywheel bolts.
- Tighten flywheel bolts in sequence (1-6) to 100 N-m (74 lb ft).
Specs & values
- Engine flywheel bolts 100 N-m (74 lb ft)
Source: General Motors service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.