Home›Repair guides›General Motors›Checking/Filling Engine Oil Level

General Motors 4.3L GM Engine — Checking/Filling Engine Oil Level

Maintenance · Engine crankcase

For the General Motors 4.3L GM Engine, from the General Motors service manual.

Before you start

  • An overfilled crankcase can cause an oil leak or a fluctuation/drop in oil pressure.

Procedure

  1. Stop engine and allow approximately five minutes for oil to drain back into the oil pan.
  2. Remove dipstick, wipe clean, and reinstall fully into the dipstick tube.
  3. Remove dipstick and note oil level; it must be between the FULL and ADD marks.
  4. If below ADD, remove the oil filler cap from the valve cover.
  5. Add required oil up to but not over the FULL mark.
  6. Reinstall oil filler cap and wipe excess oil clean.

Specs & values

  • Oil level between ADD and FULL marks

Source: General Motors service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More General Motors repair guides →