Home›Repair guides›Generac›Prepare Fuel System for Storage (Recoil Start)

Generac XD5000E — Prepare Fuel System for Storage (Recoil Start)

Maintenance

For the Generac XD5000E, from the Generac owner's manual.

Applies to: Generac XD5000E

Before you start

  • Treat diesel fuel for long-term storage; test stored fuel every 90 days

Procedure

  1. Push and hold decompression down, slowly pull recoil starter 2-3 times (do not start)
  2. Pull decompression lever up, pull recoil slowly until resistance felt to close valves
  3. Completely drain fuel tank or completely fill to proper level

Full service-parts list: Generac XD5000E →

Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Generac repair guides →