Generac XD5000E — Prepare Fuel System for Storage - Electric Start
Maintenance · Engine
For the Generac XD5000E, from the Generac owner's manual.
Applies to: Generac XD5000E
Before you start
- Eye protection is required to avoid spray from spark plug hole when cranking engine.
Procedure
- Push and hold decompression lever down.
- Push Start/Run/Stop switch to turn the engine for 2 to 3 seconds; do not start engine.
- Pull decompression lever up; pull recoil slowly until resistance is felt (closes valves so moisture cannot enter engine cylinder); gently release recoil.
- Completely drain fuel tank or completely fill fuel tank to proper level.
Full service-parts list: Generac XD5000E →
Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.