Home›Repair guides›Generac›Prepare Fuel System for Storage

Generac XD5000E — Prepare Fuel System for Storage

Maintenance · engine/fuel system

For the Generac XD5000E, from the Generac owner's manual.

Applies to: Generac XD5000E

Before you start

  • Eye protection required to avoid spray from spark plug hole when cranking engine
  • Explosion and fire risk: store fuel in well-ventilated area away from ignition sources

Procedure

  1. Push and hold decompression lever down; pull recoil starter/crank engine 2-3 seconds without starting.
  2. Pull decompression lever up; pull recoil slowly until resistance is felt, then gently release.
  3. Completely drain fuel tank or completely fill fuel tank to proper level.
  4. Treat diesel fuel with approved fuel additive and water abatement material for long-term storage.
  5. Change engine oil before storage.

Specs & values

  • Test stored fuel every 90 days and re-treat if required

Full service-parts list: Generac XD5000E →

Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Generac repair guides →