Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Generac›Winch Use, Operation and Maintenance

Generac — Winch Use, Operation and Maintenance

Maintenance

From a Generac owner's manual covering: MLT3060K, MLT3060M, MLT3080KV. Check it applies to your exact model before use.

Applies to: Generac MLT Light Tower, Generac MLT3060K, Generac MLT3060M, Mitsubishi L3E-W461ML engine

Before you start

  • Failure to replace damaged cable could result in breakage.
  • Overheating mechanical brake may cause permanent damage.

Procedure

  1. Keep winch free of dirt, oil, grease, water and other substances.
  2. Check all mounting bolts and tighten to recommended torque values; replace damaged fasteners.
  3. Periodically check all connections tight and free of corrosion.
  4. Check cable for visible damage every time winch is operated; replace damaged cable immediately.
  5. Regularly check brake for slippage or drift; if drum continues to turn after controls released, brake may need replacement.
  6. Periodically clean and grease brake assembly.
  7. Check motor brushes periodically and replace when necessary.

Specs & values

  • Only motor brushes and brake assembly require periodic replacement.

Full service-parts list: Generac MLT Light Tower →, Generac MLT3060K →, Generac MLT3060M →

Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Generac repair guides →