Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›The generator is now electrically “hot.”

Generac — The generator is now electrically “hot.”

For these Generac models: EcoGen 6kW Generator, GT-530.

Applies to: Generac Ecogen 6Kw Generator, Generac Gt 530

Procedure

  1. 4. Check battery charger power source voltage across terminals T1 and the transfer switch neutral lug; then across terminal neutral. Nominal line-to-neutral voltage should be 120 volts AC. Post Installation Start-up and Adjustments
  2. 1-888-9ACTIVATE (922-8482). If you already have your activation code, wait 3-5 seconds for the next display. ENTER ACTIVATION CODE (Passcode) TROUBLESHOOTING Display Reads: Use ARROW keys to scroll and find the first number of your Activation Code. Press ENTER to select. Repeat this step until all digits have been entered. Use ESCAPE to correct previous digits. Display Reads: Activation is complete when all digits are entered above and your screen shows this display. Follow the controller prompts to continue setting the time function. Refer to your Owner’s Manual with questions. What happens if “Wrong Passcode Try Again” appears? Reenter the activation code. If a second attempt is unsuccessful, check the number against the code given on activategen.com. If it is correct and the generator will not accept it, contact 1-888-9ACTIVATE (922- 8482). “SELECT HOUR (0-23)” “- +” 6 Escape Enter Serial 123456789 Passcode XXXXX +/- Escape Enter To Activate go to www.activategen.com Escape Enter Activate me (ENT) or ESC to run in manual Escape Enter Language - English + Escape Enter Post Installation Start-up and Adjustments

Source: manual:696471058185_use.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.