Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Generac›Service Paper Filter

Generac — Service Paper Filter

Maintenance · Air cleaner

From a Generac service manual covering: GN-190, GN-191, GN-320, GN-360. Check it applies to your exact model before use.

Browse Generac generators & specs →

Before you start

  • NEVER OPERATE ENGINE WITH AIR CLEANER ASSEMBLY OR AIR CLEANER CARTRIDGE REMOVED. FIRE MAY RESULT.

Procedure

  1. Remove the air cleaner cover.
  2. Remove the foam pre-cleaner and service it, if necessary.
  3. Remove the paper filter.
  4. Clean the paper filter by tapping gently on a flat surface; replace if very dirty.
  5. Clean the air cleaner cover, then install the foam pre-cleaner into the cover.
  6. Insert the paper filter into the cover so it holds the pre-cleaner in place.
  7. Assemble the pre-cleaner, paper filter and cover to the air cleaner base.

Source: Generac service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Generac repair guides →