Generac S2502HC / XVT076A03 — Mounting the Inverter
Installation · PWRcell Inverter
For the Generac S2502HC / XVT076A03, from the Generac service manual.
Browse Generac generators & specs →
Before you start
- Equipment damage. Mount inverter to a strong, stable surface. Never mount to drywall, plaster, or other non-structural wall treatments.
Procedure
- Verify mounting location meets all PWRcell Inverter requirements in Section 3.
- Mount inverter upright on a vertical wall. Never obstruct or allow water into intake or exhaust vents.
- Secure mounting bracket to mounting surface through mounting holes.
- Insert mounting bracket tabs into inverter body slot.
- Secure bottom of inverter to wall with two fasteners through mounting holes spaced 11 1/4 in apart.
Tools required
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Inverter weight 62.7 lbs (28.4 kg)
- Mounting holes spaced 11 1/4 in from each other
- Mounting bracket clearance holes for 1/4 in fasteners
Source: Generac service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.