Generac S2502HC / XVT076A03 — Configuring Static IP Settings
Installation · REbus Beacon
For the Generac S2502HC / XVT076A03, from the Generac service manual.
Browse Generac generators & specs →
Procedure
- From the REbus Beacon device page on the inverter screen, select the Installer Tool.
- After logging into the Installer Configuration Tool, select 'Beacon' from the menu.
- Select 'Simple IP Network Settings'.
- Adjust Name, Config, Address, Netmask, Gateway, DNS1, DNS2, MAC as needed.
- Press Submit to commit settings.
Tools required
- Smartphone or laptop Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Source: Generac service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.