Home›Repair guides›Generac›Removal From Service (Storage)

Generac QUIETPACT 75 — Removal From Service (Storage)

Maintenance · Generator

For the Generac QUIETPACT 75, from the Generac owner's manual.

Applies to: Generac QuietPact 75

Before you start

  • Never store the battery on any concrete or earthen floor.

Procedure

  1. Start engine and let it run until thoroughly warm, then shut off.
  2. While engine is still warm, drain oil completely; refill crankcase with recommended oil.
  3. Attach a tag to engine indicating oil viscosity and classification.
  4. Remove battery; store in a cool, dry room on a wooden board.
  5. Clean and wipe the entire generator.

Full service-parts list: Generac QuietPact 75 →

Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Generac repair guides →