Generac QT 6.8L 70kW — Checking Engine Oil Level
Maintenance · Engine crankcase / oil dipstick
For the Generac QT 6.8L 70kW, from the Generac owner's manual.
Browse Generac generators & specs →
Before you start
- Never operate the engine with the oil level below the dipstick ADD mark.
Procedure
- Remove oil dipstick and wipe dry with a clean, lint-free cloth.
- Install oil dipstick, then remove again.
- Oil should be between FULL and ADD marks.
- If oil level is below the dipstick ADD mark, remove oil fill cap and add recommended oil to the FULL mark.
- DO NOT FILL ABOVE THE "FULL" MARK.
Specs & values
- Oil level between FULL and ADD marks
Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.