Generac — Parallel Operation
Operation · Generator
From a Generac owner's manual covering: IQ5200DF, iQ3800, iQ3800 DF, iQ5200. Check it applies to your exact model before use.
Browse Generac generators & specs →
Before you start
- All connections to the parallel kit should be made while both inverters are turned off and all loads disconnected.
- Do not disconnect any parallel kit connections once the units are running.
Procedure
- Make sure the Engine Economy Switch is in the same position on both generators.
- Make appropriate parallel connections to the outlets on each Generac inverter as outlined in the owner's manual supplied with the kit.
- Start both units per starting instructions. Once the unit stabilizes, devices can be connected and turned on using the parallel kit outlet.
- Follow Generator Shut Down instructions.
Tools required
- Generac approved parallel kit Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.