Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Operation

Generac 20kW — Operation

For the Generac 20kW.

Browse Generac generators & specs →

Procedure

  1. 18 Display Interface Menus The LCD display is organized as detailed below: The “Home” page, this page is the default page which will be • displayed if no keys are pressed for 30 seconds. This page normally shows the current Status message and the current date and time. The highest priority active Alarm and/or Warning will be automatically posted on this page as well as flashing the backlight when such an event is detected. In the case of multiple Alarms or Warnings, only the first message will be displayed. To clear an Alarm or Warning, see the Protection Systems section - Clear Alarm. The display backlight is normally off. If the user presses any • key, the backlight will come on automatically and remain on for
  2. 30 seconds after the last key was pressed. The “Main Menu” page will allow the user to

Source: manual:9f84685f-0bec-42e0-a4e9-5c2c50b4b67b.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.