Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Oil Cooler Removal

Generac — Oil Cooler Removal

For these Generac models: 10 kVA, 10 kW, 11 kW, 13 kVA, 13 kW, 14 kW, 15 kW, 16 kW, 17 kW, 20 kW, 22 kW, 6 kW.

Browse Generac generators & specs →

Procedure

  1. Use a 10 mm socket to remove the two 10 mm bolts from the front of the oil cooler.
  2. Remove the two 10 mm bolts from the rear of the oil cooler.

Tools required

  • 10 mm socket

Source: manual:0H9172 AC Rev L (6).pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.