Generac MLT3060K / MLT3060M — Light Operation
Operation · Light system
For the Generac MLT3060K / MLT3060M, from the Generac owner's manual.
Applies to: Generac MLT3060K, Generac MLT3060M, Mitsubishi L3E-W461ML engine, Kubota D1005-E3BG1-MGM-1 engine
Before you start
- Ballast indicator lights confirm power from ballasts to lights
- Do not pull more than 1000W from each outlet when lights are on
Procedure
- Verify unit is on and running smoothly
- Switch main circuit breaker ON
- Switch individual circuit breakers for lights ON, one at a time
- Observe ballast indicator lights turn on and brighten as lights warm up
- Wait for 5-15 minute warm-up period before lights reach full output
Specs & values
- Warm-up period: 5-15 minutes
- Cool down period: 10 minutes before re-ignition
- Maximum load from outlets when lights on: 1000W Amazon eBay FridayParts $24.50 per outlet
Full service-parts list: Generac MLT3060K →, Generac MLT3060M →, Kubota D1005-E3BG1-MGM-1 engine →
Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.