Generac MFH500 — Before Towing Checklist

Operation · Trailer

For the Generac MFH500, from the Generac owner's manual.

Applies to: Generac MFH500, Isuzu 4JJ1TT4 engine

Procedure

1. Verify breakaway brake battery is fully charged.
2. Test the breakaway brake system before each use.
3. Visually check the trailer and tires for safety issues or damage.
4. Verify trailer tires are properly inflated with no uneven wear.
5. Tighten wheel lug nuts to 85–95 ft-lbs (115–129 Nm).
6. Verify all safety chains are properly connected.
7. Verify all trailer jacks are raised and secured.
8. Verify all doors and enclosures are closed and locked.
9. Verify all safety lights are in working order.
10. Verify brake controller engages trailer brakes before tow vehicle brakes.
11. Verify the tow vehicle is rated for the trailer GVWR.

Full service-parts list: Generac MFH500 →, Isuzu 4JJ1TT4 engine →

Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Generac repair guides →