Generac — Manual Operation
Operation · Transfer switch mechanism
From a Generac service manual covering: RXSC100A3, RXSC200A3, RXSW100A3, RXSW150A3, RXSW200A3. Check it applies to your exact model before use.
Browse Generac generators & specs →
Before you start
- Electrocution. Do not manually transfer under load.
Procedure
- Verify the generator is in the OFF mode.
- Turn OFF both utility and emergency power supplies to the transfer switch.
- Note position of transfer mechanism main contacts (A) by observing the movable contact carrier arm.
- With handle inserted, move handle to the desired position.
Tools required
- Manual operating handle Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Source: Generac service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.