Generac — Main rotor assembly - GTA 160 / 200 / 250
Repair & overhaul
From a Generac service manual — check it applies to your exact model before use.
Browse Generac generators & specs →
Procedure
- Position the O-ring in the back bearing channel to the bearing fitting.
- Insert the complete rotor in the vertical direction into the stator carefully with the help of a hoist.
- Fit the bearing in the back bearing to the complete rotor seat.
- Install the coupling discs.
- Put the alternator in the horizontal position.
Tools required
- hoist Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Source: Generac service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.