Generac — Magnetic Pickup Installation
Installation
From a Generac service manual covering: 9049-0, 9254-0, 9254-1, 9260-0, 9260-1, 9260-3, 9340-0, 9340-1, 9340-3, IM100G, IM80G, NP100G…. Check it applies to your exact model before use.
Browse Generac generators & specs →
Before you start
- Do not rotate the engine during adjustment.
Procedure
- Thread pickup into blower housing until tip just contacts ring gear.
- Back off about 1/2 to 3/4 turn.
- Hold in position while tightening stop nut.
- Do not rotate engine during adjustment.
Specs & values
- Back off about 1/2 to 3/4 turn
Source: Generac service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.