Generac — Lowering the Mast (Electrically)
Operation · Mast / winch
From a Generac operator's manual covering: 201CSA5411, MLT3060K, MLT3060M, MLT3080KV. Check it applies to your exact model before use.
Applies to: Generac MLT3060K, Generac MLT3060M, Mitsubishi L3E-W461ML engine, Kubota D1005-E3BG1-MGM-1 engine
Before you start
- STOP IMMEDIATELY if the mast hangs up, or the winch cable begins to develop slack.
Procedure
- Shut down the lights and engine; allow the lights to cool 10-15 minutes before lowering the mast.
- If the trailer is going to be moved, rotate the mast so the lights face the rear (loosen knob, align white arrows and metal stop tabs, tighten knob).
- Press and hold the winch control toggle switch downward to collapse the mast to its lowest position.
Full service-parts list: Generac MLT3060K →, Generac MLT3060M →, Kubota D1005-E3BG1-MGM-1 engine →
Source: Generac operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.