Home›Repair guides›Generac›Starting Pull Start Engines

Generac IQ3500 / iQ3500 — Starting Pull Start Engines

Operation

For the Generac IQ3500 / iQ3500, from the Generac owner's manual.

Applies to: Generac IQ3500

Before you start

  • Recoil could retract unexpectedly. Kickback could result in death or serious injury.

Procedure

  1. Rotate Off/On/Choke switch to CHOKE.
  2. Switch Economy switch to OFF.
  3. Firmly grasp recoil handle and pull slowly until increased resistance is felt, then pull rapidly.
  4. When engine starts, rotate Off/On/Choke dial to ON.

Full service-parts list: Generac IQ3500 →

Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Generac repair guides →