Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Generac›Starting Electric Start Engines

Generac IQ3500 / iQ3500 — Starting Electric Start Engines

Operation

For the Generac IQ3500 / iQ3500, from the Generac owner's manual.

Applies to: Generac IQ3500

Procedure

  1. Unplug all electrical loads before starting the engine.
  2. Place generator on a level surface.
  3. Rotate Off/On/Choke switch to CHOKE.
  4. Switch Economy switch to OFF.
  5. Push and hold Off/On switch in ON position; release when engine starts.
  6. When engine starts, rotate Off/On/Choke dial to ON.

Full service-parts list: Generac IQ3500 →

Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Generac repair guides →