Generac IQ3500 / iQ3500 — Generator Shut Down
Operation
For the Generac IQ3500 / iQ3500, from the Generac owner's manual.
Applies to: Generac IQ3500
Procedure
- Shut off all loads and unplug electrical loads from generator panel receptacles.
- Let engine run at no-load for several minutes to stabilize internal temperatures.
- Rotate Off/On/Choke dial to OFF.
- Turn fuel cap OFF.
Full service-parts list: Generac IQ3500 →
Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.