Generac — Inspecting the Unit
Maintenance · Light tower
From a Generac owner's manual covering: MLT3060K, MLT3060M, MLT3080KV. Check it applies to your exact model before use.
Applies to: Generac MLT Light Tower, Generac MLT3060K, Generac MLT3060M, Mitsubishi L3E-W461ML engine
Procedure
- If stored outside, check for water inside cabinet and generator before each use; dry if wet.
- Inspect electrical cords; do not use if insulation cut or worn.
- Verify winch cables in good condition and centered on each pulley; do not use kinked or unraveling cable.
- Verify mast cable correct.
- Verify safety pins for mast lock rod and mast lock bar present and secured with chain; check spring in mast lock bar.
- Verify wheel lugs present and properly tightened.
- Check coolant level daily in overflow jug; normal level between full and add.
- Check oil level daily; do not start if below add mark; add only if below add mark; do not overfill.
- Check fuel level.
Full service-parts list: Generac MLT Light Tower →, Generac MLT3060K →, Generac MLT3060M →
Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.