Generac HomeLink 6500 Series — Oil Change
Maintenance · Engine crankcase
For the Generac HomeLink 6500 Series, from the Generac owner's manual.
Applies to: Generac HomeLink 6500 Series
Before you start
- Hot oil may cause burns. Allow engine to cool before draining oil.
Procedure
- Clean area around oil drain plug.
- Remove oil drain plug and oil fill plug to drain oil completely into a suitable container.
- When oil has completely drained, install oil drain plug and tighten securely.
- Fill engine with recommended oil.
- Fill to the upper level on the dipstick.
- Dispose of used oil at a proper collection center.
Specs & values
- Change after first 30 hours and every 100 hours thereafter
Full service-parts list: Generac HomeLink 6500 Series →
Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.