Generac HomeLink 6500 Series — Installing Handle
Installation · Handle assembly
For the Generac HomeLink 6500 Series, from the Generac owner's manual.
Applies to: Generac HomeLink 6500 Series
Procedure
- Place the handle brackets between the frame tabs. Place a flat washer on the inside of each frame tab.
- Slide bolts through the handle brackets, washers and tabs.
- Place a nut on each bolt and tighten securely using a ratchet, 13 mm socket and 13 mm wrench.
Tools required
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Full service-parts list: Generac HomeLink 6500 Series →
Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.