Generac HomeLink 6500 Series — Installing Frame Feet
Installation · Frame foot assemblies
For the Generac HomeLink 6500 Series, from the Generac owner's manual.
Applies to: Generac HomeLink 6500 Series
Procedure
- Slide the M8 Hex Bolts through the holes in the Frame Rail.
- Slide the Frame Foot onto the Hex Head Bolts, then install the Locking Flange Nuts.
- Tighten securely using a ratchet, 13 mm socket and 13 mm wrench.
Tools required
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Full service-parts list: Generac HomeLink 6500 Series →
Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.