Generac HomeLink 6500 Series — Generator Cleaning
Maintenance · Generator exterior
For the Generac HomeLink 6500 Series, from the Generac owner's manual.
Applies to: Generac HomeLink 6500 Series
Before you start
- Never insert any object or tool through the air cooling slots, even if the engine is not running.
- DO NOT use a garden hose to clean generator.
Procedure
- Use a damp cloth to wipe exterior surfaces clean.
- A soft, bristle brush may be used to loosen caked on dirt, oil, etc.
- A vacuum cleaner may be used to pick up loose dirt and debris.
- Low pressure air (not to exceed 25 psi/1.72 bar) may be used to remove dirt.
- Inspect cooling air slots and openings; openings must be kept clean and unobstructed.
Tools required
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Low pressure air not to exceed 25 psi / 1.72 bar
Full service-parts list: Generac HomeLink 6500 Series →
Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.