Generac HomeLink 6500 Series — Fuel Filter Replacement
Maintenance
For the Generac HomeLink 6500 Series, from the Generac owner's manual.
Applies to: Generac HomeLink 6500 Series
Parts for this job
- 0H1326 Fuel filter Amazon eBay $7.99 KuduParts $6.00 FridayParts $8.66
Part numbers from the service-parts list for Generac HomeLink 6500 Series. Verify against your serial number before ordering; some links are affiliate links.
Procedure
- Turn fuel valve off.
- Using a pliers, squeeze the clamp and slide it back from the fuel valve; remove the hose from the fuel valve fitting.
- Slide both clamps away from the fuel filter fittings. Clamps can be reused.
- Remove the short hose from the fuel filter, then remove the filter from the longer hose.
- Place the new filter on the longer hose. The larger end (with the red dot) must face towards the fuel valve.
- Place the short length of hose on the filter, then the other end on the fuel valve.
- Place both clamps back onto the fittings of the filter and fuel valve.
Tools required
- Pliers Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Every 500 hours of operation and/or annually
Full service-parts list: Generac HomeLink 6500 Series →
Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.