Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Stator Wire Removal

Generac — Stator Wire Removal

For these Generac models: 10 kVA, 10 kW, 11 kW, 13 kVA, 13 kW, 14 kW, 15 kW, 16 kW, 17 kW, 20 kW, 22 kW, 6 kW.

Browse Generac generators & specs →

Procedure

  1. Remove all connectors from the controller.
  2. Remove all wires the common neutral and ground wires from landings.

Source: manual:0H9172 AC Rev L (6).pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.