Generac GB1000 / GB2000 — Using the Power Station (Discharging)
Operation · AC/DC Output
For the Generac GB1000 / GB2000, from the Generac owner's manual.
Browse Generac generators & specs →
Before you start
- Do not overload - total wattage must not exceed unit capacity
Procedure
- Press the Main ON/OFF button to power on the unit
- Press the AC Output ON/OFF button to enable AC outputs or DC Output ON/OFF for DC outputs
- Connect devices to appropriate receptacles (AC, USB-A, USB-C, 12V Car Port, or Wireless Charger)
- Monitor display for battery state of charge indicator
Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.