Generac — Exciter stator assembly - GTA160 / 200 / 250

Repair & overhaul

From a Generac service manual — check it applies to your exact model before use.

Browse Generac generators & specs →

Procedure

1. Place the exciter stator on the back cover and fasten the 4 assembly screws.
2. Fasten the back cover to the alternator frame.
3. Connect the F+ and F- cables in the voltage regulator positioning in the alternator terminal box and fasten them with clamps.

Source: Generac service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Generac repair guides →