Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›SECTION 1: GENERAL INFORMATION

Generac — SECTION 1: GENERAL INFORMATION

A Generac service procedure — check it applies to your exact model before use.

Browse Generac generators & specs →

Before you start

  • NOTE: A twin cylinder engine will run well on one cylin-

Procedure

  1. 1. Loose belt - a loose belt like a loose blade can cause a back-
  2. lash effect, which will counteract engine cranking effort.
  3. 2. Starting under load - see if the unit is disengaged when engine
  4. is started; or if engaged, should not have a heavy starting
  5. load.

Source: manual:0C8221.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.