Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Check that no cables are leaned against any live

Generac — Check that no cables are leaned against any live

A Generac service procedure — check it applies to your exact model before use.

Browse Generac generators & specs →

Before you start

  • DANGER

Procedure

  1. 10. Place the upper cover in the terminal box and
  2. fasten them with the screws, applying the torque
  3. recommended in Table 14.1.
  4. Figure 14.33: Terminal box upper cover
  5. 14.3 ALTERNATORS AG10
  6. All AG10 line alternators standard model have
  7. forecasting for installation of auxiliary exciter (PMG).
  8. PMG installation shall be performed in the alternator
  9. back side.
  10. DANGER
  11. Before starting the installation service of
  12. the auxiliary exciter (PMG) in the
  13. alternator, check that it cannot be driven
  14. by any manual or automatic system,
  15. isolating completely the alternator,
  16. disconnecting it mechanically and
  17. electrically.
  18. 14.3.1 Mechanical assembly of PMG
  19. To assemble the PMG in the alternator, proceed
  20. according to the steps described below:

Source: manual:WEG-assembly-and-disassembly-rocedures-g-and-ag10-line-10004126565-manual-english.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.