Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Generac›Changing the Engine Air Cleaner

Generac EcoGen 6kW Generator / GT-530 — Changing the Engine Air Cleaner

Maintenance

For the Generac EcoGen 6kW Generator / GT-530, from the Generac owner's manual.

Applies to: Generac EcoGen 6kW Generator, Generac GT-530 engine, Generac GT-530 engine

Parts for this job

Part numbers from the service-parts list for Generac EcoGen 6kW Generator. Verify against your serial number before ordering; some links are affiliate links.

Procedure

  1. Lift the roof and remove the door
  2. Turn the two screws 1/4 turn counterclockwise to loosen
  3. Remove the cover and air filter
  4. Wipe dust or debris from inside the air box
  5. Install the new air cleaner into the air box
  6. Install the cover and turn the two screws 1/4 turn clockwise to tighten

Full service-parts list: Generac EcoGen 6kW Generator →

Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Generac repair guides →