Generac — Cleaning the Unit
Maintenance · Light tower
From a Generac owner's manual covering: MLT3060K, MLT3060M, MLT3080KV. Check it applies to your exact model before use.
Applies to: Generac MLT Light Tower, Generac MLT3060K, Generac MLT3060M, Mitsubishi L3E-W461ML engine
Before you start
- Water may enter cabinet and collect in generator windings, causing damage.
Procedure
- Clean Light Tower after each use to remove dust, grease, mud, spilled fuel or oil.
- Use soft, clean rags to wipe cabinet exterior and control panel.
- Low-pressure compressed air (less than 40 PSI [276 kPa]) can remove dust from cabinet interior.
- Do not wash with high pressure hose or power washer.
- Do not wash engine block or fuel tank with power washer or steam cleaner.
Specs & values
- Low-pressure compressed air less than 40 PSI (276 kPa)
Full service-parts list: Generac MLT Light Tower →, Generac MLT3060K →, Generac MLT3060M →
Source: Generac owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.