Generac — Cleaning Intake Filter
Maintenance
From a Generac service manual covering: PWRcell M3, PWRcell M3 DCB, PWRcell M4, PWRcell M4 DCB, PWRcell M5, PWRcell M5 DCB, PWRcell M6, PWRcell M6 DCB. Check it applies to your exact model before use.
Browse Generac generators & specs →
Procedure
- Grasp pull tab (C) and push frame back to compress retention springs.
- Pull tab down and out.
- Slide filter out.
- Clean filter with a vacuum cleaner, compressed air, or water.
- Allow filter to dry before reinstalling.
- Reinstall filter.
Tools required
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Source: Generac service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.